How can Solving your Base Board Problems be easy for a Homeowner?
Homeowners struggle when figuring out solving your base board problems; what can NeatHeat do to make life simple?
Ask any homeowner or gas fitter that has tried to rework base board- it’s never an easy job to complete for a multitude of reasons. Homeowners or contractors can generally handle renovation work in the house simply because, no matter what the job, if done right it can last a pretty long time.
This isn’t the case with hot water base board, which lines the wall in most rooms in a home. Hot water base board produces energy through the heating element, which is attached to the wall and protected by metal base board parts.
The heat produced to your house is first conducted by the metal which is used to protect the heating element, and metal that’s constantly absorbing heat will rust pretty quickly. Cleaning off rust isn’t easy as you’ve got to take the time to fully scrub and remove all the particles of rust.
In addition, base board heaters are easy to miss because they line the walls along the floors, so they get kicked and bumped into by furniture on a constant basis, causing dents and scratches that need to be removed.
The Challenges in Solving your Base Board Problems
As a homeowner, you’ve only got so much free time on your hands as you work full-time and have quite a few other responsibilities to take care of. Doing renovations needs to be as efficient as possible, which is why most homeowners split off between doing renovations themselves and hiring contractors.
The advantage to doing the work yourself is you save a lot of money and, depending on your experience with the rework, you can rest assured that your work was done right. However, a homeowner’s time is valuable, and if you’re inexperienced in doing a renovation, it may take you a lot more time and be more frustrating to complete.
Many homeowners hire contractors for jobs that are far too complex for them, like installing shingles on the roof or redoing tiling. Contractors are expensive, so you can’t use them every single time, but the problem with base board is that neither option is ideal.
Whether you do the work or hire a gasfitter, you’ll find it takes a better part of the weekend to take apart all of the base board, clean off the rust, get rid of the dents and scratches, and put it all back together. Solving your base board problems is not easy, but luckily for homeowners there is an easy solution.
Using NeatHeat’s Base Board Covers in your Home
When it comes to solving your base board problems, using NeatHeat is the best, easiest solution because the covers snap right over the existing base board, even if parts are damaged or missing. The advantage is that the covers are made of a composite polymer, so they’re not going to rust, chip, dent, or show scratches easily due to their continuous color.
In addition, the covers are made with titanium dioxide to not yellow or fade in color over time, and they have been thermally conditioned to not take damage while protecting your heating element. NeatHeat covers are effective at solving your base board problems because they are easy to install and are low maintenance.
The covers can easily be cleaned with household products or painted with a spray paint for polymers, making them the best option for homeowners as they try to maintain the covers over time. To learn more about solving your base board problems with NeatHeat, click here.