Fixing your Problems with Hot Water Base Board in Seconds

Homeowners always want an easy way to redo their hot water base board; the answer is through heater covers.

hot water base boardA common struggle for homeowners is being able to carve out the time in their schedule for do it yourself renovations. The average homeowner will dish out the money to someone else to do large and even mid-scale renovations because they simply do not have the time and energy to do it themselves.

Your time is the most valuable thing you have, and wasting it on renovations that aren’t really providing you with any lasting benefit should be mitigated. On the other hand, you want your house to look good pretty much 24/7, which means you’ve got to do something to constantly keep your house in good shape.

To save money, many homeowners will roll up their sleeves to do renovations but end up spending way too much time on something that has a much easier solution. A prime example is hot water base board, which many homeowners consider to be the ugliest part of the home.

These metal heaters line the walls along the floors in most rooms a home, and the metal heaters product a heating element that provides air conditioning to the home. They look very outdated and out of place already, but with the heaters conducting so much energy in such a short span in time, they rust very fast.

The Issues with a Hot Water Base Board

In addition, because they are so easily unnoticed, they get kicked and bumped into, especially in rooms where furniture tends to move around. There’s no easy solution to physically cleaning the heaters because these heaters are all over the house and it takes time to take them apart and then actually painstakingly clean each piece before putting it back together.

Plus, once you finish cleaning them, they’re just going to get disgusting again within a few months, especially with rust. Homeowners want an easy alternative to their hot water base board issue, which is why using a heater cover has become such a hit for homeowners with base board.

A cover can be easy to install and easy to maintain, meaning renovating your heaters is as easy as working on the covers. Plus, a good looking cover can actually add to the look of your home rather than detract from it.

The Benefits to Using NeatHeat Baseboard Covers

Many a residence owner has purchased the ultimate cover for a hot water base board: NeatHeat. NeatHeat’s baseboard covers are made of a polymer, so they don’t oxidize and they do not take or show damage like dents or scratches.

Since there are downsides with polymers too, these covers have been modified to not only take temperatures much higher than your home’s operating temperatures, but also to not yellow or fade in color over time.

NeatHeat’s covers install in a snap; all you need is the long pieces (six or four feet) which you can easily cut with a hack or chop saw, the splice plates to extend short pieces, the corner pieces, and end caps to seal the deal. You can even score and snap the end caps in case the floor is higher than the bottom of your baseboard or if the pipe attaches to the end of a particular strip of baseboard.

NeatHeat covers are easy to clean and repaint as well; standard household cleaners will take off any filth in seconds!

With NeatHeat, you get the best possible way to cover your hot water base board by spending the least time or money. To learn more about hot water base board covers from NeatHeat, click here.