The Best Way to get Baseboard Renovations

How can NeatHeat be the solution when it comes to baseboard renovations in your home?

Considering you spend the vast majority of your time in your home, it stands to reason that you want to make sure your home looks as good as possible all of the time. Homeowners spend countless amounts of time cleaning, repairing, and redoing parts of the house at any given time, and they need an effective way to do so without overspending.

After all, renovations take time and will only last so long, and you want to get your money’s worth. You wouldn’t spend a lot of money and time on repainting a room just for the paint to get chipped and disgusting within a few short months.

Likewise, you don’t want to spend both time and money on redoing your baseboard heaters when they’re guaranteed to get rusted, dented, and disgusting within a few short months. Many homes have a hot water baseboard heating system, so their baseboard has heaters that line the walls in most rooms in their house.

These heaters are metal and tend to look outdated even at their newest, so when they get rusted, kicked, scratched, and dusty, they tend to look incredibly bad in your home. The issue comes in redoing them: it’s no simple matter, as taking apart each piece on a strip of baseboard can be incredibly time-consuming and frustrating, especially when you have the elements and other parts in the way.

Baseboard Renovations Options

Once you get the system apart, you can repaint, clean the parts, or even replace them before putting everything back together, but then they’ll just end up looking disgusting within a few short months. It can be tough to find a workaround to this issue, but the more recent option is to simply cover up the baseboard.

After all, good baseboard renovations need to be permanent, and the right cover can be a much more permanent option for your home. When it comes to a baseboard cover, you don’t want to buy some expensive, ineffective option; you want a good baseboard cover when it comes to your baseboard renovations.

This is where NeatHeat comes into play, as NeatHeat baseboard covers can provide you with the most bang for your buck. They’re made of a composite polymer, so they’re never going to rust, chip, or dent, and they are designed specially to never fade in color or melt or offset gas below the operating temperatures of the home.

Installing NeatHeat’s Baseboard Covers

NeatHeat covers are also incredibly easy to install; there are six footers and four footers, but if you need different lengths, you can easily cut pieces as well as use the splice plates to extend shorter pieces. There are end caps to top off the entire system, as well as an inside corner piece to complete the baseboard renovations.

Plus, if your floor was installed after the baseboard, or there is a pipe attached to the end of the baseboard system, that part of the end cap can be easily scored and snapped off. Maintaining your NeatHeat baseboard system is easy as well, as all of the parts can be cleaned using household cleaners and repainted using a spray paint for polymers.

With NeatHeat’s baseboard renovations, you save money while getting a system that’s easy to install, easy to maintain, and lasts quite a bit of time. In addition, NeatHeat covers also provide a much sleeker, newer look to your home compared to your baseboard heater.

To learn more about getting the best possible baseboard renovations from a company like NeatHeat, click here.