Three Problems with Baseboard Heat that can be Solved with NeatHeat

What are the different problems with baseboard heat you run into when renovating your home, and how can baseboard covers solve these problems?

Owning and maintaining a house is no small feat, and requires quite a bit of time, money, and effort to keep in the best shape possible. Residence owners always have to spend time at certain intervals getting the interior and exterior of the building looking good, whether it’s for cosmetic purposes or for practical purposes.

In other words, there’s always a reason to keep your house looking appealing, which is why you want renovations you do to be as effective as possible. You don’t want to spend all sorts of time and money just to complete work that will need to be redone within a few short weeks or months.

If you can add longevity to your renovations, it is guaranteed to save you both time and money in the long run. A prime example is when you’re dealing with redoing your baseboard heaters.

Problems with Baseboard Heat

Hydronic heaters or hot water heaters line the baseboard throughout a home interior, so redoing the entire system is no small feat. Plus, each individual strip of baseboard takes time to take apart, and then you clean, repaint/replace the parts, and reattach everything.

However, the problems with baseboard heat are that the heaters are made of metal and tend to rust easily as well as get dented and dirty very quickly, so all of the work you do is essentially for naught.

Taking precious hours out of your free time to take apart an entire baseboard system and pay money to either paint or replace the parts, only to deal with the same issue again so soon is incredibly frustrating. The problems with baseboard heat are many but luckily can be easily solved using the appropriate baseboard heater cover.

Using Baseboard Covers for your Home

A cover will eliminate the need to take a long time renovating your baseboard heaters and are designed to be a much more permanent option as a renovation. When it comes to cost, however, you need to make sure that the cover you buy is cost-effective and provides as many benefits as possible for the price.

Enter NeatHeat’s baseboard covers, designed specifically to solve all of your problems with baseboard heat and save you money in the long run. With NeatHeat, you get a baseboard cover that’s incredibly easy to install and can be maintained using any household products.

All of the pieces install with a snap, and any parts too long can be cut with a hack saw or chop saw and pieces too short can be attached together with a splice plate. If you want to clean the covers, all you do is pop off the pieces and use your average household cleaner; any filth on the cover comes off fairly easily.

Using NeatHeat’s Covers to Fix your Problems

If you want to repaint, a spray paint designed for a polymer found at your average hardware store will do the trick. The covers are made of a composite polymer, specially designed to never yellow or fade in color.

Since the covers are a polymer, they will never rust, chip, or dent, and the continuous white color prevents scratches from being seen easily. There are a host of advantages to using NeatHeat covers, both cosmetically and practically, considering the problems with baseboard heat home owners may encounter.

The covers do not have any issues with the heat itself or prevent air flow and are even designed to child-proof your baseboard heaters and their sharp, metal edges.

With NeatHeat, all of your problems with baseboard heat can be taken care of and you can save money! To learn more about NeatHeat, click here.