How to Easily Fix the Base Board in your Home

It’s tough trying to figure out the best way to fix the base board, but NeatHeat covers can make it simple.

It’s the ultimate goal of many to finally own a house instead of renting on a month to month basis. A house is easily the most expensive and high-maintenance items you will purchase in your lifetime though, and there’s a lot you’ll run into that you won’t expect.

Many homeowners don’t realize how many do-it-yourself projects they’ll take on until they first purchase the house, from dealing with some home wiring to re-tiling the bathroom to installing kitchenware. Ask any homeowner though, and they’ll tell you it’s worth having your own property, as your money is going into your own property instead of going to rent.

Many homeowners deal with various renovations and have to prioritize when and how to get them done. After all, you’ve only got so much free time on your hands so you’ve got to figure out the most efficient way to get all the work done.

Many homeowners will spend the extra money to have a professional get the work done for them, especially when they’re concerned about the difficulty of the task. This also gives them some time to spend on other work, but they can only hire contractors so often.

The Struggles when you Try to Fix the Base Board

Homeowners will generally try to take on as many renovations as possible, as that will make it easier for them financially, especially if they’re more tech-savvy. However, the tougher renovations can make it difficult as far as time and money goes, and a prime example is base board.

Homeowners will find that when you try to fix the base board, it takes much longer than intended and is not nearly as effective as hoped. To redo your base board you’ve got to take apart every part strip of base board, piece by piece, clean them all, and put it back together.

Since there are base board strips lining the walls of most rooms in a home, there’s a lot of work to do just taking apart and putting together base board. However, when you factor in the rust, dents, scratches, and other damages, cleaning can add a lot more time and effort.

These damages are constant and reoccurring unfortunately, especially when you realize that metal base board that is constantly conducting heat is going to be rusting all of the time. In addition, base board is very easy to kick and bump into, so dents and scratches are going to be a constant issue.

Using NeatHeat to make Life Easy

All homeowners struggle when they fix the base board as they spend the better part of the weekend renovating it, just to deal with redoing that work over and over again within a short span of time. The solution is not physically working on the base board, but instead using a cover.

NeatHeat covers are made of a composite polymer, so they won’t rust, chip, or dent, and they don’t yellow or fade in color over time due to the usage of titanium dioxide. NeatHeat covers easily and effectively snaps right on over the base board, even if parts are damage or missing, making for an easy renovation.

Using NeatHeat means that you can fix the base board in seconds, as the covers snap on easily, don’t take damage normally like metal, and are very easy to maintain over time. You can use household cleaners and get the job done in seconds.

To learn more about the advantages of using NeatHeat to fix the base board permanently, click here.