8
Jul

How Base board Heat Reconditioning can be Done in Seconds

Why is base board heat reconditioning generally difficult, and how can you make it an easy process?

base board heat reconditioningBeing a homeowner becomes incredibly challenging for quite a few reasons: not only do you have to take a lot of time to take care of your home, but you’ve got to do so during full-time work and other personal responsibilities.

Homeowners have to somehow figure out a way to juggle their full time jobs with work like cleaning their home and small/large scale home renovations, both of which can be difficult. Some larger renovations like repainting or retiling a room can be easy if you have the skills to pull it off, it’s going to take up a bit of your time though.

At the end of the day, that’s what renovations boil down to: time is money, and your time as a homeowner is considered vital. However, hiring a contractor or a professional to do the work for you isn’t cheap either, so you end up balancing your free time and your money to get all the upkeep in your home accomplished.

The Challenges in Home Renovations

Either way, the goal is to get the most efficient renovation accomplished, which means not wasting too much time and money to get a renovation completed that lasts long, works well, and looks good. However, this isn’t always easy, especially when it comes to base board heat reconditioning.

Hot water base boards produce energy through the heating element which is absorbed and conducted by the surrounding metal; the problem is the metal conducts so much energy that it is easily damaged.

Once oxidation sets in and the base board gets bumped into, dented, and scratched, it becomes time for renovation, which involves taking apart the base board strip by strip, repairing the pieces,and putting it all back together. Cleaning rust off of metal is not an easy thing to pull off, and getting rid of dents and scratches from the base board is incredibly time consuming.

All in all, a base board renovation takes up the vast majority of a weekend and doesn’t last more than a couple months, which ends up being incredibly frustrating for the average homeowner. Even very skilled gas fitters and renovation experts don’t have very good solutions when it comes to your base board heat reconditioning, so finding an alternative in base board covers can be very useful for home owners.

Base Board Heat Reconditioning Made Easy with NeatHeat

Base board heat reconditioning covers can snap right on over the existing base board or even replace the metal parts on the base board. In fact, base board covers from companies like NeatHeat only need the back plate and the clips underneath the heating element, and they snap right on.

NeatHeat’s covers are made of a composite polymer, so they don’t rust, chip, or dent, and they have been designed different from standard polymer to not yellow, fade in color over time, or take damage from the heat of the element.

NeatHeat’s covers are easy to install, easy to remove from the base board, and easy to clean and repaint. If you want to do base board heat reconditioning, you snap the cover off, use household cleaners or a spray paint for polymers to get the work done in minutes, and snap the covers right back on again.

NeatHeat’s base board heat reconditioning is the fastest, most efficient way to do work on your base board. To learn more about using NeatHeat, click here.